Basic HTML Version
The Resource For All Your Welding, Gases and Safety Supplies!
11.ESAB.1
The Resource - (Filler Metals, Chemicals & Fluxes)
Specifications
Q
AWS A5.28: E80C-Ni1
Q
ASME SFA 5.28
Coreweld 80C-Ni1
Coreweld 80C-Ni1 is a metal-cored wire for application where good low-temperature impact toughness or
weathering characteristics are required. It operates over a broad range of parameters, produces a smooth,
spray transfer with minimal fume and spatter, and is tolerant of light rust and millscale. The shielding gas used
should be 75-92/25-8 Argon CO
2
. Coreweld 80C-Ni1 is alloyed with 1% Ni to provide good low-temperature
impact toughness. It also meets the requirements in AWS D1.1 and D1.5 for use on unpainted weathering
steels. It is suitable for making single or multi-pass welds in the flat or horizontal position using conventional
(DCEP or DCEN) or pulsed power.
Coreweld 70
Coreweld 70 is a tubular wire containing ingredients primarily comprised of metal powder along with additional
arc stabilizers and alloying elements. The net result is a high efficiency (90-98%) wire. Arc characteristics,
weld metal transfer, and spatter levels are improved, while silica islands are minimized with the use of Argon
mixtures up to 92% Argon. Due to the high level of iron powder and low slag components, the only slag
formed by this wire are small islands of silica. Coreweld 70 was designed for multi-pass welding in robotic
applications where slag removal between passes is difficult. This metal-cored product is intended for use on
carbon steels having tensile strengths up to 70 ksi (485 MPa). Coreweld 70 wires from .045 in. (1.14 mm), up
to 1/16 in. (1.58 mm), are capable of being welded out of position.
Specifications
Q
AWS A5.18: E70C-6M
Q
ASME SFA 5.18
Q
Certified by C.W.B.- CSA W48
Q
D.N.V.- III YMS(H10)
Q
L.R.- 3S, 3YS(H10)
Q
B.V.- SA3YM(HH)
Q
TUV
Q
DEUTSCHE BAHN
Q
G.L.- 3YH10S
Specifications
Q
AWS A5.20: E70T-1CH8/T-9CH8
Q
ASME SFA 5.20
Q
Certified by C.W.B.- CSA W48
Q
A.B.S.- 2SA,2YSA
Q
DNV III YMS
Q
L.R. - 3S,3YS
Dual Shield
®
700X
Dual Shield 700X is a high deposition, deep penetration wire for joining of heavy structural steel components.
Designed for flat and horizontal position welding using CO
2
shielding gas, this X-Series wire provides high
deposition rates, high efficiency, and excellent performance. The bead contour, smooth ripple, and slag
chemistry allow for easy slag removal even in narrow groves.
Dual Shield 710X
Seismic Certified “D” Dual Shield 710X is an all-position flux cored wire for general purpose welding. It
provides outstanding operator appeal with an easily controlled arc, improved operation at both lower and
higher current levels, minimal spatter, and easy slag removal. Dual Shield 710X can be used with either 100%
CO
2
or a 75/25 Argon CO
2
gas mix, however pure CO
2
is recommended in applications where weld joint
restraint is high. Applications include rail car, barges, civil construction, light equipment and general fabrication.
Specifications
Q
AWS A5.20:
E71T-1C-DH8/T-1M/T-9C-DH8/T-9M
Q
AWS A5.20: E71T-1M/T-9M H8
Q
ASME SFA 5.20
Q
Certified by C.W.B.- CSA W48
Q
A.B.S - 3SA, 3YSA
Q
DNV III YMS
Q
L.R. - 3S,3YS
Dual Shield 710X-M
Dual Shield 710X-M provides outstanding operator appeal with an easily controlled arc, improved operation at
both lower and higher current levels, minimal spatter and easy slag removal. Dual Shield 710X-M is designed
to be used with 75/25 Argon CO
2
gas mix, however pure CO
2
may also be used.
Specifications
Q
Seismic Certified “D”
Q
AWS A5.20:
E71T-1MD/T-9MD H8
Q
AWS A5.20:
E71T-1C/T-9C H8
Q
ASME SFA 5.20
Q
Certified by C.W.B.-
CSA W48
Q
A.B.S - 35A, 3YSA
Q
MIL-E-24403A
MIL-71T-1M
Q
DNV-111 YMS
Q
LR-3Y40S (H10)
Q
GL
Dual Shield 810X-Ni-1
Dual Shield 810X-Ni1 provides outstanding operator appeal with an easily controlled arc, improved operation
at both lower and higher current levels, minimal spatter, and easy slag removal. Dual Shield 810X-Ni1 is
designed for use with 100% CO
2
. It is an excellent choice for welding on COR-TEN
®
steel in applications
where weathering-grade wires are not desirable.
Specifications
Q
Seismic Certified “D”
Q
AWS A5.29: E81T1-Ni1CD H8
Q
Certified by C.W.B.- CSA W48
Coreweld
®
77-HS
Coreweld 77-HS is a metal-cored wire designed to run at faster travel speeds, higher deposition rates, and
leave very few silica islands. This metal-cored wire is ideal for robotic applications. Optimal performance is
achieved with 90/10 Argon CO
2
shielding gas.
Specifications
Q
AWS A5.18: E70C-6M H4
Q
ASME SFA A5.18
Q
Certified by C.W.B.- CSA W48
Q
D.N.V.- III YMS
CoreweldC6
Coreweld C6 was developed and fine-tuned especially for hand-held, automatic, and robotic welding in the
automotive industry, as well as rail car manufacturing, structural welding, and other similar applications.
Never before has there been such a perfect pairing of filler metal and industry requirements for quality,
productivity, and profitability.
Specifications
Q
AWS A5.20: Seismic Certified “D”
Q
AWS A5.18: E70C-6M H4
Q
ASME SFA 5.18
Q
Certified by C.W.B.- CSA W48
Q
A.B.S. - 3SA, 4YSA
Coreweld 88HS-Ni1
Coreweld 88HS-Ni1 is recommended primarily for robotic or mechanized high speed welding of sheet steel.
Welding speeds up to 90 ipm (2.2 m/min) are possible when welding vertical down. The low slag level of
Coreweld 88HS-Ni1 minimizes post-weld clean up. For this reason, Coreweld 88HS-Ni1 gives special advantage
in applications where post-weld coating or painting is specified. Coreweld 88HS-Ni1 is a 1% nickel low-alloy
metal-cored wire designed specifically for high-speed welding where a clean weld surface is required.
Coreweld 88HS-Ni1 deposits have very few silicon islands and almost no slag at the weld toes.
Specifications
Q
SAWS A5.28: E80C-Ni1H8
Cored Wires